CardBoard GCC v1.2.2 DIY
IMPORTANT: If you select the “Brainless” keep in mind that advanced chip soldering is required. That option is not recommended for users unfamiliar with the techniques and tools required for transplanting a chip from one board to another. Additionally, the required parts needed to be transplanted are the CNT-DOL Chip and the transistor Q3.
The CardBoard GCC is an upcycling project that upgrades crusty, dusty, rusty, corroded and/or cracked original GCC boards into a fully modded GCC with a very simple and end-user friendly layout for customization.
The included features are as follows:
- T1, T2, T3 Stick Support
- Heartbeat Modules for Left Stick and C-Stick
- Built-in Left Stick and C-Stick DAC (for B0XX conversions and C-Pad)
- Easy Remapping for ABXYZ
- Tactile D-Pad Support
- Tactile START Support
- Mouse Click ABXY w/ Through-Holes for easy mounting
- Aftermarket Z Support
- Left Z Support
- Fight Stick/B0XX Conversion Support
- SASI Support
- Fixed Analog Triggers (Digital Press gives Light Shield or Mid-Shield)
- Independently Toggleable Digital Triggers
- 5V Internal Accessory Line
- Laser Shell Support/3.3V Accessory Line
*DISCLAIMER FOR POPULATED BOARDS* THE CHIPS USED ARE SECOND HAND ITEMS AND ARE NOT BRAND NEW
IMPORTANT: If you select the “Brainless” keep in mind that advanced chip soldering is required. That option is not recommended for users unfamiliar with the techniques and tools required for transplanting a chip from one board to another. Additionally, the required parts needed to be transplanted are the CNT-DOL Chip and the transistor Q3.
The CardBoard GCC is an upcycling project that upgrades crusty, dusty, rusty, corroded and/or cracked original GCC boards into a fully modded GCC with a very simple and end-user friendly layout for customization.
The included features are as follows:
- T1, T2, T3 Stick Support
- Heartbeat Modules for Left Stick and C-Stick
- Built-in Left Stick and C-Stick DAC (for B0XX conversions and C-Pad)
- Easy Remapping for ABXYZ
- Tactile D-Pad Support
- Tactile START Support
- Mouse Click ABXY w/ Through-Holes for easy mounting
- Aftermarket Z Support
- Left Z Support
- Fight Stick/B0XX Conversion Support
- SASI Support
- Fixed Analog Triggers (Digital Press gives Light Shield or Mid-Shield)
- Independently Toggleable Digital Triggers
- 5V Internal Accessory Line
- Laser Shell Support/3.3V Accessory Line
*DISCLAIMER FOR POPULATED BOARDS* THE CHIPS USED ARE SECOND HAND ITEMS AND ARE NOT BRAND NEW
IMPORTANT: If you select the “Brainless” keep in mind that advanced chip soldering is required. That option is not recommended for users unfamiliar with the techniques and tools required for transplanting a chip from one board to another. Additionally, the required parts needed to be transplanted are the CNT-DOL Chip and the transistor Q3.
The CardBoard GCC is an upcycling project that upgrades crusty, dusty, rusty, corroded and/or cracked original GCC boards into a fully modded GCC with a very simple and end-user friendly layout for customization.
The included features are as follows:
- T1, T2, T3 Stick Support
- Heartbeat Modules for Left Stick and C-Stick
- Built-in Left Stick and C-Stick DAC (for B0XX conversions and C-Pad)
- Easy Remapping for ABXYZ
- Tactile D-Pad Support
- Tactile START Support
- Mouse Click ABXY w/ Through-Holes for easy mounting
- Aftermarket Z Support
- Left Z Support
- Fight Stick/B0XX Conversion Support
- SASI Support
- Fixed Analog Triggers (Digital Press gives Light Shield or Mid-Shield)
- Independently Toggleable Digital Triggers
- 5V Internal Accessory Line
- Laser Shell Support/3.3V Accessory Line
*DISCLAIMER FOR POPULATED BOARDS* THE CHIPS USED ARE SECOND HAND ITEMS AND ARE NOT BRAND NEW
