GameCube Controller Services
OEM GameCube Controller Buttons (ABXY and Z) sanded down to be nice and smooth to help your fingers glide smoothly across them.
*DISCLAIMER* THESE ARE SECOND HAND ITEMS AND ARE NOT BRAND NEW, HOWEVER, THEY HAVE BEEN MODIFIED TO LOOK AND FEEL BRAND NEW!
IMPORTANT: The shipping address is included in the order confirmation email after your order is placed!
Electrically reduces snapback on the left analog stick virtually eliminating all misinputs when using the stick. Essential for competitive and casual play.
IMPORTANT: The shipping address is included in the order confirmation email after your order is placed!
Customize your GameCube Controller further with a custom paracorded GameCube Controller cord.
IMPORTANT: The shipping address is included in the order confirmation email after your order is placed!
These aftermarket springs require a much lighter press than OEM springs. Reduces the necessary force for a full press by roughly 33%, making each trigger press a lot quicker and allowing for more accurate trigger positioning.
IMPORTANT: The shipping address is included in the order confirmation email after your order is placed!
Send in your GameCube Controller and convert it into a Phob!
What is a Phob?
A Phob is a custom board that uses magnets and sensors (doesn’t degrade) for the analogue stick inputs instead of potentiometers (does degrade). It also allows the user to calibrate it to fit their specific needs via software (change snapback sensitivity, rumble intensity, digital triggers, etc).
What is a potentiometer?
A potentiometer is a piece of metal making contact with a conductive plane to produce an analogue signal. Potentiometers over time will degrade and become less responsive with inputs. All potentiometers experience a sort of degradation, so it’s not a matter of ‘if’ but ‘when.’
PHOB GITHUB HOMEPAGE
CALIBRATION GUIDE (Best if using SmashScope app on Wii, find that HERE)
UPDATING PHOB 2.0 FIRMWARE
IMPORTANT: The shipping address is included in the order confirmation email after your order is placed!
NOTE: Tall Trigger Plugs come pre-installed with this mod
This mod is absolutely required if wanting to reduce the travel distance of your controller’s triggers and play Ultimate. The reason being that Ultimate doesn’t check for the digital press, only a certain threshold in the analogue signal of the triggers. Putting in Trigger Plugs won’t suffice since the analogue value won’t reach/exceed the necessary threshold. That’s where this mod comes in, you get a digital feeling input (like A, B, X, Y, etc.) while giving the game the analogue value it’s looking for.
IMPORTANT: The shipping address is included in the order confirmation email after your order is placed!
Have a button you want to swap with another? Maybe make the ‘Y’ Button Grab and the ‘Z’ Button Jump? With this mod any button can be whatever you want it to be! All you need to do is select which buttons you want swapped at the drop boxes below!
NOTICE: This mod is unnecessary if wanting to do it to a Phob because button remaps, in that instance, are done via software. Information on that can be found HERE.
IMPORTANT: The shipping address is included in the order confirmation email after your order is placed!
Lubricated Triggers makes each trigger press nice and buttery, gliding up and down with ease.
RECOMMENDATION: It is recommended to get the trigger springs annealed. So not only will the controller’s triggers feel premium, but they’ll sound premium as well by deleting the rattle sound the trigger springs tend to make.
IMPORTANT: The shipping address is included in the order confirmation email after your order is placed!
What does a Trigger Plug do?
A Trigger Plug reduces the travel distance required to complete a full press.
What’s the difference between a Short Plug and a Tall Plug?
Short Plug: Allows you do a full light shield when lightly depressed and a hard shield when fully depressed. Both actions are much quicker to perform due to tactile queues and reduced travel distance.
Tall Plug: Cuts out any analogue inputs for the triggers resulting in only being able to hard shield. Reduces the travel distance almost completely aside from the distance required for a digital button press (like A, B, X, Y, etc.).
Timeline is as follows:
6/18/2025: Pre-Orders Open and necessary parts are ordered
6/30/2025: Pre-Orders Close
7/1/2025 - 7/7/2025: Parts Arrive and Boards Begin Production
7/21/2025 - 8/7/2025: Boards Arrive and ALL Brainless orders will begin shipping, ALL conversions will be notified to send in their controller, and pre-assembled boards will begin assembly
9/7/2025: All Orders have been fulfilled
*DISCLAIMER* - The provided dates are just estimates and not necessarily concrete days when specific things will be occurring. Some times may be slower or faster depending on supply chain issues or shipping delays.