Dolphin Echolocator
A tester board for GCC Stick Potentiometers, GCC Trigger Potentiometers, and GCC Z Buttons. It utilizes a similar circuit to what an OEM GCC uses so all readings will be 1:1 representations from what you’ll get if the parts were installed in an OEM GCC. All the potentiometers and Z buttons will be hot swappable due to the use of “hot swap” sockets (Mill-Max 7305).
NOTE: Stick Boxes, Potentiometers, Z Switches, and GCC Cable are not included. However, the CNT-DOL chip, Q3, and Mill-Max 7305 Sockets will come pre-installed!
A tester board for GCC Stick Potentiometers, GCC Trigger Potentiometers, and GCC Z Buttons. It utilizes a similar circuit to what an OEM GCC uses so all readings will be 1:1 representations from what you’ll get if the parts were installed in an OEM GCC. All the potentiometers and Z buttons will be hot swappable due to the use of “hot swap” sockets (Mill-Max 7305).
NOTE: Stick Boxes, Potentiometers, Z Switches, and GCC Cable are not included. However, the CNT-DOL chip, Q3, and Mill-Max 7305 Sockets will come pre-installed!
A tester board for GCC Stick Potentiometers, GCC Trigger Potentiometers, and GCC Z Buttons. It utilizes a similar circuit to what an OEM GCC uses so all readings will be 1:1 representations from what you’ll get if the parts were installed in an OEM GCC. All the potentiometers and Z buttons will be hot swappable due to the use of “hot swap” sockets (Mill-Max 7305).
NOTE: Stick Boxes, Potentiometers, Z Switches, and GCC Cable are not included. However, the CNT-DOL chip, Q3, and Mill-Max 7305 Sockets will come pre-installed!
